





Overview
A 65 mm brushless Tiny Whoop for indoor racing and freestyle, in three versions. Champion has 36000KV motors and a 2.2 g frame, Racing has 30000KV motors, and Freestyle has softer 25000KV motors with longer flight. It replaces the original Air65, and BetaFPV's crash tests showed no flight controller failures after 20 wall crashes, against failures on the old 4-grommet Air65.
It is a manual FPV craft running Betaflight, so it does not hold altitude or position on its own. It weighs about a fifth of a Tello and is flown through goggles. The Aquila16 is the gentler BetaFPV starting point. This drone-only (BNF) version needs separate analog goggles, an ExpressLRS radio and 1S batteries.
- Type
- Drone · Indoor drones
- Maker
- BetaFPV
- Released
- 2026
- Price
- $99.99 – $104.99
- Status
- Available
- Best for
- Ages 14+
- Programming
- Community / unofficial SDK
Versions compared
| Champion | Racing | Freestyle | |
|---|---|---|---|
| Price (BetaFPV) | $104.99 | $99.99 | $99.99 |
| Weight | 16.6 g | 17.7 g | 17.8 g |
| Motors | 0702 36000KV, dual ball bearings | 0702 30000KV, brass bushings | 0702 25000KV, brass bushings |
| Props | Gemfan 1207 3-blade | Gemfan 1207 3-blade | Gemfan 1219S 3-blade |
| Frame | Air65 Champion (2.2 g) | Air65 II | Air65 II |
| Antenna | Whip | Copper pipe | Copper pipe |
| Motor wiring | Soldered | Plug-in connectors | Plug-in connectors |
| Flight time (LAVA II 320 mAh) | 4:40 | 4:30 | 5:00 |
All three share the Matrix 1S 5IN1 II board, C03 camera, 25–400 mW VTX and ELRS 2.4 GHz receiver. Specs and prices from BetaFPV's product page (October 2026). BetaFPV Air65 II ↗
Price and shipping
Drone only (BNF, with the ELRS receiver built in). No battery, radio or goggles are included. RaceDayQuads in the US listed the Freestyle at $116.99
Shipping: 12–30 days (standard). BetaFPV lists all three versions in stock (October 2026), from $99.99 with free standard shipping at that price. Standard delivery is estimated at 12–30 days by registered mail, and expedited DHL/FedEx shipping was suspended. RaceDayQuads in the US listed the Freestyle at $116.99 in stock, with Racing and Champion sold out. BetaFPV ↗
Specifications
| Category | Drones · Indoor drones |
|---|---|
| Released | 2026 |
| Country | China |
| Availability | Available |
| Programmability | Community / unofficial SDK |
| Built-in autonomy | None / scripted · Moves only when controlled, or plays preset motions |
| LLM support | Possible via SDK · No built-in LLM. An LLM on a computer could fly it through an ExpressLRS transmitter module over CRSF, or talk to Betaflight over MSP, but no official tools exist. |
| MuJoCo simulation | None found · Nothing found for this airframe. Betaflight has a software-in-the-loop build, but no model of this drone was found. |
| NVIDIA Isaac simulation | None found · Nothing found for this airframe. Betaflight has a software-in-the-loop build, but no model of this drone was found. |
| Gazebo simulation | None found · Nothing found for this airframe. Betaflight has a software-in-the-loop build, but no model of this drone was found. |
| Best for | Ages 14+ (estimated) |
| Vision sensors | Camera |
| Actuators | Brushless / direct-drive motors |
| Audio | No audio |
| Compute type | Arduino / ESP32 / microcontroller |
| Remote control | Via SSH / web / bridge |
| Size | 65 mm wheelbase, 16.6–17.8 g depending on version (without battery, unconfirmed) |
| Drive | Brushless ducted quadcopter, 0702 motors (25000–36000KV by version), Gemfan 1207 or 1219S 3-blade props, 1S battery |
| Compute | Matrix 1S 5IN1 II flight controller (STM32G473 MCU, 12A ESC, ELRS receiver and VTX on one board) running Betaflight 4.5.3 with Bluejay ESC firmware |
| Vision | C03 analog FPV camera (1200TVL, 160° FOV), onboard 25–400 mW 5.8 GHz VTX, tilt 15–45° |
| Lidar | None |
| Sensors | IMU (ICM42688P, ICM42622, BMI270 or LSM6DSK320X depending on supply), voltage and current sensing |
| Runtime | 4:30–5:00 min depending on version (LAVA II 1S 320 mAh) |
| Speed | Not published |
| SDK | Betaflight firmware (open source, GPL) with Betaflight Configurator and the MSP serial protocol over USB. A computer can also fly it through an ExpressLRS 2.4 GHz transmitter module that takes CRSF commands. There is no maker SDK. |
Common questions
How much does Air65 II cost?
Air65 II is listed at $99.99 – $104.99. Drone only (BNF, with the ELRS receiver built in). No battery, radio or goggles are included. RaceDayQuads in the US listed the Freestyle at $116.99.
Can Air65 II be bought today?
Yes, it is on sale. Typical shipping time is 12–30 days (standard). BetaFPV lists all three versions in stock (October 2026), from $99.99 with free standard shipping at that price. Standard delivery is estimated at 12–30 days by registered mail, and expedited DHL/FedEx shipping was suspended. RaceDayQuads in the US listed the Freestyle at $116.99 in stock, with Racing and Champion sold out.
Who makes Air65 II?
Air65 II is made by BetaFPV. It came out in 2026.
Can Air65 II be programmed?
Community / unofficial SDK. Betaflight firmware (open source, GPL) with Betaflight Configurator and the MSP serial protocol over USB. A computer can also fly it through an ExpressLRS 2.4 GHz transmitter module that takes CRSF commands. There is no maker SDK.
Does Air65 II have AI chat or LLM support?
Possible via SDK. No built-in LLM. An LLM on a computer could fly it through an ExpressLRS transmitter module over CRSF, or talk to Betaflight over MSP, but no official tools exist.
What age is Air65 II for?
Ages 14+ (estimated).
Ratings & reviews
Ratings and reviews load on the live site.
Related guides
- Robot Vision and Depth Sensors · cameras, lidar and other distance sensors
Tello EDU
Crazyflie 2.1+ / Brushless
CodeAIR
LiteWing
CoDrone EDU
RoboMaster TT (Tello Talent)