Name: MOVA P10 Pro Ultra (P-series)
Brand: MOVA
Availability: InStock

MOVA (China) MOVA P10 Pro Ultra (P-series) (1)

$320 – $640MOVA US sells the original P10 Pro Ultra for $320 and the P10 Pro Ultra Gen2 for $427 (Amazon $398.99); P20, P50 and P70 models run $369 – $641.

AvailableOfficial API or root firmware13,000 PaLidar + RGB cameraWashing dockValetudo (P10 Pro Ultra)

≤ 1 weekShipping: 2–5 days. The original P10 Pro Ultra is in stock at MOVA US in October 2026, and the Gen2 ships next day from Amazon. MOVA US ↗

Remote control: After rooting with Valetudo the robot serves a local web UI, REST API and MQTT, so any computer on the network can control it. Unrooted, it is app only apart from the community Home Assistant integration.

Official page ↗Official page (Gen2, not rootable) ↗Valetudo supported robots ↗Valetudo Dreame rooting guide ↗Vacuum Wars MOVA guide ↗

Overview

The P10 Pro Ultra is MOVA's budget all-in-one dock robot and the main reason the P-series is in the hackable tier. Valetudo lists it as rootable with relatively easy steps that leave warranty seals intact, using the same fastboot method as Dreame's robots, so it is the cheapest new robot with a washing dock that can run fully local, at $320 from MOVA US in October 2026. Only that exact model qualifies, since the P10 Ultra, P10 Pro Ultra Gen2, P20, P50 and P70 are not on the list. Suction (13,000 Pa) and hot-water washing are modest next to the newer P models. For a Dreame-branded rootable alternative see the L40 Ultra.

Specifications

Category	Cleaning robots · Hackable & programmable
Released	2024
Country	China
Availability	Available
Programmability	Community / unofficial SDK
Built-in autonomy	Task-level · Carries out multi-step jobs on its own, such as inspections, deliveries or chores
LLM support	None · Voice commands through Alexa or Google only, no built-in LLM.
Best for	Ages 12+ (estimated)
Vision sensors	Lidar, Camera, Depth camera
Actuators	DC / gear motors
Audio	Speaker
Compute type	Other ARM chip
Remote control	Official API or root firmware
Size	Gen2 350 × 350 × 104 mm, dock 340 × 317 × 590 mm
Suction	13,000 Pa (P10 Pro Ultra), 26,000 Pa (Gen2), up to 30,000 Pa (P20, P70)
Cleaning	Vacuum with a rubber main brush and extending side brush, plus twin spinning mops that extend to edges and lift 10.5 mm on carpet
Dock	Empties the bin for about 75 days, washes mops with 65 °C water (100 °C on Gen2 and P70) and dries them with hot air, refills the robot
Navigation	Lidar (LDS) with room mapping
Obstacle avoidance	RGB camera with 3D structured light and dirt detection on the P10 Pro Ultra, structured light only on the Gen2
Runtime	5,200 mAh battery (runtime not published)
Smart home	MOVAhome app, Alexa, Google Assistant, video calls with pets, community Home Assistant integration
Sensors	Lidar, RGB camera, structured light, carpet and cliff sensors, bumper
Compute	Allwinner ARM SoC running Linux (64-bit), per the Valetudo rooting guide; exact chip not published
API / hacking	No official API. Valetudo lists the MOVA P10 Pro Ultra only (not the P10 Ultra, and the P10 Pro Ultra Gen2 and newer P models are not listed). Rooting uses the Dreame fastboot method with the Dreame Breakout PCB on a factory-reset robot